AMQUEST CORPORATION
AM3314I-V34, AM3314I-HY
Card Type |
Modem (synchronous/asynchronous) |
Chipset |
Rockwell |
Maximum Data Rate |
33.6Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Modulation |
Bell 103A, 212A ITU-T V.22bis, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression |
MNP5, MNP10, V.42, V.42bis |
Fax Class |
Class I & II |
Data Bus |
8-bit ISA |
Card Size |
Full height, one-third length |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Telephone line |
CN1 |
Telephone line |
CN2 |
USER CONFIGURABLE SETTINGS | ||
Setting |
Label |
Position |
í Factory configured - do not alter |
SW1/7 |
Off |
í Factory configured - do not alter |
SW1/8 |
Off |
Note: SW1/8 may not be present on all models. |
SERIAL PORT ADDRESS SELECTION | ||
Setting |
SW1/5 |
SW1/6 |
3F8h (COM1:) |
On |
On |
2F8h (COM2:) |
Off |
On |
3E8h (COM3:) |
On |
Off |
í 2E8h (COM4:) |
Off |
Off |
INTERRUPT SELECTION | ||||
Setting |
SW1/1 |
SW1/2 |
SW1/3 |
SW1/4 |
í 3 |
Off |
Off |
Off |
On |
4 |
Off |
Off |
On |
Off |
5 |
Off |
On |
Off |
Off |
7 |
On |
Off |
Off |
Off |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \L, \W |
%C, %E, %F, %L, %Q |
Special AT Commands |
#CID, :E, *H, -K, )M, @M, -Q |
S-Registers |
The S-registers are unidentified. |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
See AMQUEST CORPORATION AM2814I-V34 for a full command summary.