IBM CORPORATION
IBM PCJR CLUSTER ADAPTER
|
NIC Type |
Unidentified |
|
Network Transfer Rate |
Unidentified |
|
Data Bus |
PCjr expansion bus |
|
Topology |
Linear Bus |
|
Wire Type |
RG-59B/U 75ohm coaxial |
|
Boot ROM |
Available (location unidentified) |
|
CONNECTIONS | |
|
Function |
Label |
|
RG-59B/U 75ohm coaxial connector |
CN1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
| » |
Factory configured - do not alter |
SW1/7 |
Off |
|
Boot ROM enabled |
SW1/8 |
On | |
|
Boot ROM disabled |
SW1/8 |
Off | |
|
NODE ADDRESS | ||||||
|
Setting |
SW1/1 |
SW1/2 |
SW1/3 |
SW1/4 |
SW1/5 |
SW1/6 |
|
0 |
Off |
Off |
Off |
Off |
Off |
Off |
|
1 |
On |
Off |
Off |
Off |
Off |
Off |
|
2 |
Off |
On |
Off |
Off |
Off |
Off |
|
3 |
On |
On |
Off |
Off |
Off |
Off |
|
4 |
Off |
Off |
On |
Off |
Off |
Off |
|
59 |
On |
On |
Off |
On |
On |
On |
|
60 |
Off |
Off |
On |
On |
On |
On |
|
61 |
On |
Off |
On |
On |
On |
On |
|
62 |
Off |
On |
On |
On |
On |
On |
|
63 |
On |
On |
On |
On |
On |
On |
|
Note: A total of 64 node address settings are available. The switches are a binary representation of the decimal node addresses. SW1/6 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/6=32, SW1/5=16, SW1/4=8, SW1/3=4, SW1/2=2, SW1/1=1. Turn on the switches and add the values of the switches that are on to obtain the correct node ID. (Off=0, On=1) | ||||||