ACCTON TECHNOLOGY CORPORATION

ETHERCOMBO-16 (EN1640)

NIC Type

Ethernet

Transfer Rate

10Mbps

Data Bus

16-bit ISA

Topology

Star

Linear Bus

Wiring Type

Unshielded twisted pair

RG58A/U 50ohm coaxial

AUI transceiver via DB-15 port

Boot ROM

Available

INITIAL STATE CONFIGURATION

Mode

JP1

»

Initial state disabled 1

Open

 

Initial state enabled 2

Closed

 

Note 1 Adapter uses default configuration settings, or user selected settings through software.
2 Adapter is forced into an INITIAL STATE, where adapter mode is NE1000, I/O address is 280h, IRQ is

CABLE TYPE

Type

JP2

RG-58A/U 50ohm coaxial

Pins 1 & 2 Closed

AUI transceiver via DB-15 port

Pins 2 & 3 Closed

Note:Twisted pair wire is selected through the configuration software that comes with the card.

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

LED1

Green

On

Twisted pair network connection is good

LED1

Green

Off

Twisted pair network connection is broken

Note:LED1 indications are only valid when the cable type is twisted pair wire.