MICRONICS COMPUTERS, INC.
M54HI-PLUS
Processor |
CX M1/Pentium |
Processor Speed |
75/90/100/120/133/150/166MHz |
Chip Set |
Intel |
Video Chip Set |
None |
Maximum Onboard Memory |
128MB (EDO supported) |
Maximum Video Memory |
None |
Cache |
256/512KB |
BIOS |
Phoenix |
Dimensions |
337mm x 216mm |
I/O Options |
32-bit PCI slots (4), floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), cache slot, IR connector, wavetable connector, legacy connector, CD-ROM sound connector, sound riser card connector |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
IDE interface 2 |
J9 |
Reset switch |
J39 |
IDE interface 1 |
J10 |
IDE interface LED |
J40 |
Floppy drive interface |
J11 |
Speaker |
J41 |
PS/2 mouse interface |
J12 |
Turbo LED |
J43 |
Power LED & keylock |
J18 |
Sound riser card connector |
J44 |
Parallel port |
J19 |
Wavetable connector |
J45 |
Serial port 1 |
J20 |
CD-ROM sound connector |
J46 |
Serial port 2 |
J21 |
32-bit PCI slots |
PC1 - PC4 |
IR connector |
J23 |
Cache slot |
SL1 |
Legacy connector |
J26 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
Jumper information unavailable |
J22 |
Unidentified | |
Jumper information unavailable |
J48 |
Unidentified | |
Jumper information unavailable |
J49 |
Unidentified | |
» |
BIOS boot block normal operation |
W6 |
Pins 2 & 3 closed |
BIOS boot block reversed |
W6 |
Pins 1 & 2 closed | |
» |
CMOS memory normal operation |
W9 |
Open |
CMOS memory clear |
W9 |
Closed |
DRAM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
8MB |
(2) 1M x 36 |
None |
16MB |
(2) 2M x 36 |
None |
16MB |
(2) 1M x 36 |
(2) 1M x 36 |
24MB |
(2) 2M x 36 |
(2) 1M x 36 |
32MB |
(2) 4M x 36 |
None |
32MB |
(2) 2M x 36 |
(2) 2M x 36 |
40MB |
(2) 4M x 36 |
(2) 1M x 36 |
48MB |
(2) 2M x 36 |
(2) 4M x 36 |
64MB |
(2) 8M x 36 |
None |
64MB |
(2) 4M x 36 |
(2) 4M x 36 |
72MB |
(2) 8M x 36 |
(2) 1M x 36 |
80MB |
(2) 2M x 36 |
(2) 8M x 36 |
96MB |
(2) 4M x 36 |
(2) 8M x 36 |
128MB |
(2) 8M x 36 |
(2) 8M x 36 |
Note: Banks 0 & 1 are interchangeable. |
CACHE CONFIGURATION | |
Size |
SL1 |
256KB |
256KB module installed |
512KB |
512KB module installed |
CPU SPEED SELECTION | |||||||
CPU speed |
Clock speed |
Multiplier |
W2 |
W4 |
W5 |
W8 |
W10 |
75MHz |
50MHz |
1.5x |
Open |
Closed |
Closed |
1 & 2 |
Open |
90MHz |
60MHz |
1.5x |
Open |
Open |
Closed |
2 & 3 |
Open |
100MHz |
66MHz |
1.5x |
Open |
Closed |
Open |
2 & 3 |
Open |
120MHz |
60MHz |
2x |
Closed |
Open |
Closed |
2 & 3 |
Open |
133MHz |
66MHz |
2x |
Closed |
Closed |
Open |
2 & 3 |
Open |
150MHz |
60MHz |
2.5x |
Closed |
Open |
Closed |
2 & 3 |
Closed |
166MHz |
66MHz |
2.5x |
Closed |
Closed |
Open |
2 & 3 |
Closed |
Note: Pins designated should be in the closed position. |
CPU TYPE SELECTION | |
Type |
W14 |
VR |
Open |
VRE |
Closed |
MISCELLANEOUS TECHNICAL NOTE |
If J44 is used, PC1 slot must be left empty. |