D E S K S T A R 5 3 4 3 3 0 IBM Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 8400| 8400| Capacity form/unform 4330/ MB Heads 5| 16| 15| Seek time / track / ms Sector/track | 63| 63| Controller IDE / ATA3 Precompensation Cache/Buffer KB Landing Zone Data transfer rate MB/S int Bytes/Sector 512 33.300 MB/S ext DMA Recording method operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 65 Power: sleep W Humidity % 8 90 | 5 95 standby W Altitude km -0.300 3.048| -0.300 12.000 idle W Shock g 10 | 75 seek W Rotation RPM read/write W Acoustic dBA spin-up W ECC Bit ON THE FLY,SMART MTBF h Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** IBM DESKSTAR 5 JUMPER SETTING +---------------------------------------------------------------+ | | | | | +--------------------------------------1---G-----A-+------1-+ | | |* * * * * * * * * * * * * * * * * * * * * * * * * |X X X X | | | |* * * * * * * * * * * * * * * * * * *+-+* * * * |X X X X | | +-+------AT-INTERFACE---------------------+ +-JUMPER-+-POWER--+-+ ********************************************************************** J U M P E R S ********************************************************************** IBM DESKSTAR 5 JUMPER SETTING Jumper Setting ============== Interface Connector 3M 3417-7000 or equivalent 16 Logical Head 15 Logical Head --------------- --------------- G E C A G E C A X * * X Device 0 X * xxx X * * X (Master) X * * * H F D B H F D B G E C A G E C A * * X X Device 1 * * xxx * * X X (Slave) * * * * H F D B H F D B G E C A G E C A * X * X Cable Select * X xxx * X * X * X * * H F D B H F D B G E C A G E C A X * * X Device 1 X X * * X * * X (Slave) X X * * H F D B Present H F D B All other jumper setting patterns are reserved. Do not make other settings. Shipping default settings: 16 head logical architecture is enabled. Master is set to on (i.e. jumper on pins A-B and G-H. No other jumpers are fitted. ********************************************************************** I N S T A L L ********************************************************************** IBM DESKSTAR 5 NOTES ON INSTALLATION Notes on installation ===================== Installation direction ---------------------- horizontally vertically +-----------------+ +--+ +--+ | | | +-----+ +-----+ | | | | | | | | | +-+-----------------+-+ | | | | | | +---------------------+ | | | | | | | | | | | | | | | | | | +---------------------+ | +-----+ +-----+ | +-+-----------------+-+ +--+ +--+ | | | | +-----------------+ The drive will operate in all axis (6 directions). Mount the drive securely, using the appropriate brackets or rails, in any axis, using four 6-32 UNC metric screws in either bottom or side mounting holes. The max. screw insertion depth for the bottom mounting is 5.5mm (0.21 inch) and for side mounting 3.5 mm (0.14 inch).