7 2 9 0 A MAXTOR NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 941| | Capacity form/unform 290/ MB Heads 4| 14| | Seek time / track 14.0/ 3.0 ms Sector/track | 43| | Controller IDE / ATA2 FAST/ENHA Precompensation Cache/Buffer 64 KB Landing Zone Data transfer rate 3.000 MB/S int Bytes/Sector 512 9.000 MB/S ext Recording method RLL 1/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 71 Power: sleep 1.7 W Humidity % 5 95 | 5 95 standby 1.7 W Altitude km -0.061 3.048| idle W Shock g 10 | 70 seek 3.8 W Rotation RPM 3551 read/write 4.0 W Acoustic dBA spin-up W ECC Bit 88 MTBF h 300000 Warranty Month 24 Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** MAXTOR 7290A QUICK REFERENCE +---------------------------------------------------------+ | +-+-+-+-+ | | +++++++++ | | J25-+ |J23+--J22 XX | J24---+ +-+ XX | +-+J20XX | +-+J19XX | +-+J18XX J1 | +-+J17X* | +-+J16XX | XX | XX | XX | XX1-2 | | 1 | XX Power | XX J2 +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** MAXTOR 7290A QUICK REFERENCE Jumper setting ============== Note: Jumper J25 is factory reserved. Jumper J19 is a spare shunt. J16 I/O Channel Ready ---------------------- J16 CLOSED Option Enabled J16 OPEN Option Disabled (default) J17 ECC -------- J17 CLOSED 4-Byte emulation J17 OPEN 11-Byte (default) J18 Low Power Spin Mode ------------------------ J18 CLOSED Enabled J18 OPEN Disabled (default) J20 Master/Slave ----------------- J20 CLOSED Only drive in single drive system (Default) J20 CLOSED Master in dual drive system J20 OPEN Slave in dual drive system J22 Drive Compatibility ------------------------ J22 CLOSED Enabled J22 OPEN Disabled (default) J23 Write Cache ---------------- J23 OPEN Enabled (default) J23 CLOSED Disabled J24 Cable Select ----------------- J24 OPEN Disabled (default) J24 CLOSED Enabled