Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin AT Interface (IDE) connector	JP1
4-pin connector-Drive active LED	JP2
34-pin control cable connector-floppy drive	JP3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP4	closed
	Floppy drive disabled	JP4	open

MISCELLANEOUS TECHNICAL NOTES

Some versions of this card do not have a floppy enable/disable jumper on board.