DATA BUS:		16-BIT, ISA
Size:	Half-length, half-height card
Hard drives supported:	Two IDE(AT) drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
4-pin connector-Drive Active LED	J1
40-pin XT Interface (IDE) connector	J2

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive port address is 1F0-1F7h	JP7	open
	Hard drive port address is 170-177h	JP7	closed
»	I/O Channel Ready signal disabled	JP10	open
	I/O Channel Ready signal enabled	JP10	closed

IRQ14 STATUS
Function		Jumper JP1	Jumper JP2
»	IRQ14 normal	closed	open
	IRQ14 delayed until ACTIVE- signal is removed	open	closed

MISCELLANEOUS TECHNICAL NOTES

JP3 through JP6, and JP8 & JP9 are Not used.