D 3 7 4 1 NEC Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 733| 423| | Capacity form/unform 44/ MB Heads 7| 8| | Seek time / track 23.0/ 8.0 ms Sector/track 17| 26| | Controller IDE / AT Precompensation Cache/Buffer KB Landing Zone Data transfer rate 1.500 MB/S int Bytes/Sector 512 MB/S ext Recording method RLL operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle W Shock g | seek 12.0 W Rotation RPM 3600 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 50000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** NEC D3741 APPLICATION NOTE Jumper Setting ============== x = Jumpers set at factory Drive Switching --------------- +--------+-------+-----------------+ | JP12 |JP13 | | +--------+-------+-----------------+ | CLOSED |OPEN |Drive C: (Master)| +--------+-------+-----------------+ | CLOSED |CLOSED |Drive D: (Slave) | +--------+-------+-----------------+ ********************************************************************** I N S T A L L ********************************************************************** NEC D3741 APPLICATION NOTE INSTALLATION PROCEDURE ====================== System Embedded Controller - Set up Type: 21 (44MB) or USER Type 48/49 with physical parameters - FDISK - FORMAT C:/S External Adapter ---------------- Adapter with no BIOS see above (not for NOVELL 2.15/ELS) Adapter with BIOS: NCL 538/539 - Set up Type: Typ 1 (45MB) - FDISK - FORMAT C:/S SOFTWARE -------- DOS 3.30 and up NOVELL ELS I/II NOVELL 2.15 NOVELL 386 UNIX/XENIX If low level format is necessary use WDFMT.EXE program with the physical drive parameter. ********************************************************************** F E A T U R E S ********************************************************************** NEC NEC DRIVES INSTALLATION GUIDE DEC. 92 REV. A NEC drives ----------- The NEC IDE/SCSI drives are designed to work in the IBM AT and compatible systems and gurantee the operation with any standard IDE and SCSI Controller. Further, the NEC drives provide compatibility to the ATA/SCSI CAM and ANSI (X3-131-199x) standard as well as to all known operating systems.